1. Product Description
COMPLINE Series are high-performance lubricants designed for use in rotary screw and piston type air compressors. The synthetic grades (ISO VG 46 and 68) provide extended service life, superior oxidation stability and excellent performance in rotary screw compressors operating under severe and continuous service. The mineral grades (ISO VG 100 and 150) provide reliable protection and cost-effective operation in piston compressors under standard conditions.
2. Advantages
• Synthetic grades: Extended drain intervals, excellent oxidation and thermal stability
• Mineral grades: Cost-effective and reliable protection for piston compressors
• Excellent anti-wear protection for compressor components
• Outstanding deposit control and carbon build-up reduction
• Good demulsibility, rust and corrosion protection
• High resistance to oxidation and varnish formation
3. Applications
• ISO VG 46 & 68 Synthetic: Rotary screw compressors operating under severe load and continuous service
• ISO VG 100 & 150 Mineral: Piston compressors in general industrial applications
• Suitable for stationary and mobile air compressor systems requiring high performance lubrication
4. Performance Standards & Specifications
|
Standard / Specification |
Synthetic (ISO VG 46/68) |
Mineral (ISO VG 100/150) |
|
ISO 6743-3: ISO-L-DAH / DAG |
✔ |
– |
|
ISO 6743-3: ISO-L-DAB / DAJ |
– |
✔ |
|
DIN 51506 VDL |
✔ |
✔ |
|
Major OEM Requirements |
✔ |
✔ |
5. Typical Technical Properties (Range Overview)
|
Property |
MINERAL |
SYNTHETIC |
||||||
|
Grade |
46 |
68 |
100 |
150 |
46 |
68 |
100 |
150 |
|
Kinematic Viscosity @ 40°C, mm2/s, ASTM D445 |
41,4 – 50,6 |
61,2 – 74,8 |
90 – 110 |
135 - 165 |
41,4 – 50,6 |
61,2 – 74,8 |
90 – 110 |
135 - 165 |
|
Kinematic Viscosity @ 100°C, mm2/s, ASTM D445 |
6,5–7,5 |
8,5–9,3 |
11,0–12,5 |
14 - 16 |
6,5–7,5 |
8,5–9,3 |
11,0–12,5 |
14 - 16 |
|
Viscosity Index, ASTM D2270, Min. |
97 |
95 |
95 |
95 |
110 |
110 |
110 |
110 |
|
Pour Point, °C, ASTM D97, Max. |
-24 |
-21 |
-18 |
-15 |
-35 |
-32 |
-30 |
-25 |
|
Flash Point, COC, °C, ASTM D92, Min. |
210 |
220 |
230 |
230 |
215 |
225 |
235 |
235 |
|
Density @ 15.6°C, g/ml, ASTM D4052 |
0.875 |
0.880 |
0.885 |
0.885 |
0.865 |
0.870 |
0.875 |
0.875 |
Disclaimer: The typical properties listed above represent average values and may vary within acceptable manufacturing tolerances. This information does not constitute a specification.
6. Packaging Options
Available in: 20L pail, 55L drum, 200-208L barrel, 1000L IBC
Private label and bulk delivery options available on request.
7. Storage & Handling
- Store between 0°C and 40°C in dry, well-ventilated conditions
- Avoid direct sunlight and ignition sources
- Shelf life: 5 years in original sealed packaging
8. Health & Safety
Refer to the Material Safety Data Sheet (MSDS) for complete guidance on handling, disposal, and safety precautions.
Note: The information provided is based on current knowledge and experience. It does not constitute a legally binding assurance of specific properties.